Skip to content
FitUploads

How to Sign, Scan and Crop a Signature for Online Forms

By FitUploads · Published · Updated

On this page

Sign on plain white paper with a dark pen, scan or photograph the page flat in even light, crop tightly around the signature, and export a real JPEG that falls inside the notice’s KB window. The details that trip people up are the layout rule (a drawn box, or three signatures), the ink colour, and the size of the final file.

This guide covers the routine, then a table of signature rules from official notices.

What the notices ask for

Exam Signature file Layout and ink Source
SSC CGL, CHSL, MTS, GD JPEG, 10-20 KB, about 6.0 x 2.0 cm (CGL and CHSL annexures also print 4.0 x 2.0 cm) Horizontally aligned and 300 DPI (GD notice); blurred or miniature rejected SSC CGL notice
IBPS PO 140 x 60 px, 10-20 KB Black ink, white paper, not capitals IBPS
UPSC JPG, 20-100 KB Three signatures, vertical, black ink, white paper UPSC portal
TNPSC 230 x 75 px (6.0 x 2.0 cm), 10-20 KB Sign in a drawn box, blue or black ink TNPSC
RRB Level 1 30-49 KB, min 140 x 60 px Running handwriting, not capitals RRB
NTA (JEE Main) 4-30 KB Scanned JPG JEE Main
RPSC / Rajasthan portal JPEG, 280 x 80 to 560 x 160 px Scanned; phone photos of a signature not accepted Rajasthan portal

The IBPS PO, SSC MTS, SSC GD and TNPSC rows were checked against the official PDFs on 22 November 2026. The other rows are flagged unverified on their pages. The notice you apply under wins.

Step 1: Choose your signature once

Pick one version of your signature and use it everywhere. RRB’s notice says the signature must be uniform and identical at all stages of the process, and IBPS says a signature that does not match your attendance sheet or call letter can lead to disqualification. A signature you change from form to form is a risk later.

If the notice says running handwriting, write in your normal hand. IBPS, SBI and RRB all reject capital-letter signatures.

Step 2: Prepare the paper and pen

  • Plain white paper with no lines, creases or print.
  • A dark pen: black, or blue where the notice allows it (TNPSC says blue or black).
  • A flat desk and bright, even light.

If the notice asks for a box, draw it first. TNPSC asks for a 6.0 x 2.0 cm box (230 x 75 px) and tells candidates to sign within it, then scan at 200 DPI and crop to the box. UPSC asks for three signatures, one below another. Draw guide lines lightly if you must, but they must not appear in the final crop.

Step 3: Scan or photograph it

A scanner or scanning app gives the cleanest result. If you use a phone camera:

  1. Place the paper on a flat, plain surface.
  2. Hold the phone directly above, parallel to the paper.
  3. Avoid your own shadow and avoid the flash.
  4. Take the photo at a high resolution; you will shrink it later.

The Rajasthan portal guide says photos of a signature taken on a mobile phone are not accepted, so use a scanning app that produces a flat scan if you apply there.

Step 4: Crop and straighten

Crop as close as you can while leaving a small margin around the strokes. Rotate the image until the signature reads level. SSC’s constable notice specifically says the signature should be horizontally aligned.

Cropping matters for size. A whole A4 page contains mostly empty paper, which wastes pixels and often produces a miniature signature, the exact fault SSC warns about. See why exam photos are rejected.

Step 5: Resize and export

Set the size the notice gives. If it only gives centimetres, convert using pixels = cm x DPI / 2.54; the photo size explainer has a table. Then export as JPEG and read the size in KB.

  • Too large: reduce the pixel size a little, or lower the quality.
  • Too small: increase the pixel size, or raise the quality. RRB’s 30 KB minimum is a good example, handled by the RRB Group D preset.

Choose your form in the photo resizer to apply the size and range automatically. Everything runs in your browser; your signature is never uploaded.

A worked example: a 10-20 KB signature

Suppose a notice asks for a JPEG of 10-20 KB at about 6.0 x 2.0 cm and you have a 3 MB phone photo of a signed page. First crop to the signed area, which removes most of the pixels. Resize to roughly 480 x 160 px, which is 80 pixels per centimetre and a reasonable assumption when the notice gives centimetres only. Export at medium JPEG quality and read the size. If it shows 24 KB, lower the quality one notch or reduce the width to about 440 px and export again. If it shows 7 KB, raise the quality. Target about 15 KB, the middle of the window, so one more save does not push it out.

If your signature is long, do not squash it into a narrow box; keep the aspect ratio the notice describes and sign a little smaller on the paper instead.

Presets for the common forms

Mistakes to avoid

Mistake Why it fails Fix
Whole page scanned and shrunk Miniature signature Crop tight first
Block capitals Rejected by IBPS, SBI and RRB Sign in your normal hand
Ruled paper or shadows Looks blurred or noisy Plain paper, even light
Rotated image Fails an alignment rule Straighten before export
PNG renamed to .jpg Not a real JPEG Export as JPEG
Different signature at every stage Mismatch with later checks One version everywhere

Before you upload

Open the exported file at full size. The strokes should be continuous and dark, the background plain white, the line level, and the size inside the window.

Ready to try it? Open the photo & signature resizer. Resize to exact pixels and KB in your browser.

Quick steps

The short version of this guide:

  1. Read the signature rules in your notice. Note the KB range, size or pixel dimensions, format, ink colour and any layout rule such as three signatures or a drawn box.
  2. Sign on plain white paper. Use a dark pen. Sign inside the box or layout the notice describes, with no ruled lines, creases or text nearby.
  3. Scan or photograph it flat. Use a scanner or a scanning app in good, even light. If you use a phone, hold it directly above the page so there is no tilt or shadow.
  4. Crop tightly and straighten. Crop to just the signature or the drawn box, and rotate it so the line of writing runs level.
  5. Resize, export as JPEG and check the KB. Set the pixel size, export as a real JPEG and confirm the file size is inside the window before you upload.

Frequently asked questions

Can I type my signature or use a font?

Notices ask for a scanned handwritten signature. SSC and IBPS warn against blurred or capital-letter signatures, and RPSC says phone photos of a signature are not accepted. Use a real handwritten one.

What ink colour should I use?

It depends on the notice. IBPS says black ink on white paper, UPSC says black ink, TNPSC says blue or black. Where the notice is silent, dark ink on white paper scans best.

My signature changes a bit each time. Does that matter?

It can. RRB says the signature must be uniform and identical at every stage, and IBPS warns that a mismatch with your attendance sheet can lead to disqualification. Pick one version and keep to it.

Why is my signature file too large?

Most often the whole page was scanned at high resolution. Crop to the signature and resize to the pixel size in the notice, then export as JPEG.

Can I use the same signature file for several forms?

Only if it matches each notice's size and rules. SSC, IBPS, UPSC and RRB all differ, so check each one.

Requirements change. Confirm them against the latest official notification before you submit.