Photo size in KB explained: KB, pixels, DPI and cm
By FitUploads · Published · Updated
On this page
KB measures the file’s weight, pixels measure the image’s width and height, DPI links pixels to print size, and centimetres describe the printed picture. To hit a KB range such as 20-50 KB, set the pixel size first and then adjust JPEG quality until the saved file falls inside the window.
Most form rejections come from mixing these up. This guide defines each term, shows the arithmetic, and lists the numbers from official notices.
The four measurements
| Term | What it measures | Typical use in a notice |
|---|---|---|
| KB (kilobyte) | Size of the saved file | “20 KB to 50 KB” |
| Pixels (px) | Width and height of the image in dots | “200 x 230 pixels” |
| DPI | Pixels per inch when printed or scanned | “200 DPI” |
| cm | Size on paper | “3.5 cm x 4.5 cm” |
KB is the one the upload page checks first. A form that allows 10-200 KB rejects a 201 KB file and also rejects 9 KB. Pixels drive KB: more pixels mean more data to store. DPI matters when a notice talks about scanning paper. cm is how the picture looks when printed.
Converting cm to pixels
The rule: pixels = cm x DPI / 2.54.
| Print size | 100 DPI | 200 DPI | 300 DPI |
|---|---|---|---|
| 3.5 x 4.5 cm photo | 138 x 177 px | 276 x 354 px | 413 x 531 px |
| 6.0 x 2.0 cm signature | 236 x 79 px | 472 x 157 px | 709 x 236 px |
| 4.5 x 2.0 cm signature | 177 x 79 px | 354 x 157 px | 531 x 236 px |
Use the pixel figures the notice itself prints. Many notices give only centimetres, and then you choose a conversion. SSC prints “about 6.0 cm x 2.0 cm” for its signature; our preset assumes 80 pixels per centimetre, giving 480 x 160. That assumption is stated on the SSC CGL preset.
DPI inside the file is usually just a label. The pixel dimensions and the bytes are what an upload form can test. Some notices still print a DPI, so if yours does, set it: the IBPS PO preset shows 200 DPI for the thumb impression and declaration.
Real numbers from official notices
| Form | Photo | Signature | Source |
|---|---|---|---|
| SSC (2026 notices) | live capture | 10-20 KB, about 6.0 x 2.0 cm (CGL and CHSL also print 4.0 x 2.0 cm in an annexure) | SSC |
| IBPS PO XVI | 200 x 230 px, 20-50 KB | 140 x 60 px, 10-20 KB | IBPS |
| UPSC (upload sheet as quoted to us; IFoS 2025 notice says 50-300 KB) | 20-200 KB | 20-100 KB | UPSC portal |
| TNPSC | 130 x 170 px, 20-50 KB | 230 x 75 px, 10-20 KB | TNPSC |
| RRB Level 1 | live capture | 30-49 KB, min 140 x 60 px | RRB |
| BPSC site (hosts a UPSC IFoS 2025 notice) | 50-300 KB | 50-300 KB | BPSC |
The IBPS, TNPSC and SSC signature rows were read in the official PDFs on 22 November 2026. The UPSC, RRB and BPSC rows are flagged as unverified. The preset pages say which figures are confirmed.
How to reduce a photo to a KB range
Three levers change file size, in this order of strength.
- Crop. Remove the background and margins you do not need. Fewer pixels means fewer bytes.
- Resize. Set the pixel dimensions from the notice. A 4000 x 3000 phone image is far bigger than any form needs.
- JPEG quality. Lower quality compresses harder. Going from high to medium typically shrinks the file noticeably while a face still looks fine.
Always work in that order. Lowering quality on an uncropped, full-size image gives a small file full of blur. Cropping and resizing first lets you keep the quality high.
How to increase a file to reach a minimum
Minimums catch people who compress too hard. The notice hosted on BPSC’s site sets 50 KB as a floor and RRB’s Level 1 notice sets 30 KB for the signature.
To raise a file’s size:
- Export at a larger pixel size, for example 420 x 240 instead of 140 x 60 for a signature.
- Raise the JPEG quality.
- Avoid scanning to black-and-white-only modes, which can produce tiny files.
The RRB Group D preset takes this route, using 420 x 240 px so a clean signature can reach 30 KB while staying under 49 KB.
A worked example: a 20-50 KB photo at 200 x 230 pixels
IBPS PO asks for 200 x 230 pixels (preferred) and 20-50 KB. Start with a 4 MB phone photo. Crop so the head and shoulders fill the frame with a plain white background behind you. Resize to 200 x 230 px; the file is now a few dozen KB even before compression. Export as JPEG at high quality and read the size. If it is 62 KB, lower the quality a step and export again. If it is 14 KB because the image is very small and smooth, raise the quality, since the floor is 20 KB. You are aiming for roughly 30-40 KB.
Aim for the middle of the range
If the window is 20-50 KB, aim for about 35 KB. Re-saving a JPEG can change the size by a few KB, and aiming for the edge risks falling out on the final export. Read the size in your file manager after saving, because some apps show a rounded value.
Format matters too
A form that says JPG or JPEG wants a real JPEG. UPSC names its files “photo” and “signature”, and TNPSC names them “Photograph.jpg” and “Signature.jpg”. Renaming a PNG does not convert it. Export in the correct format using the photo resizer.
Common mistakes
- Reading MB and KB as the same number. 1 MB is about 1,000 KB.
- Setting the correct pixel size and ignoring the KB range, or the reverse.
- Shrinking quality so far the face or ink blurs, which is its own rejection reason; see why exam photos get rejected.
- Reusing last year’s file after a notice changed the size. For signatures in particular, read the signature upload guide.
Skip the arithmetic
Choose your form in the photo resizer. The preset applies the pixel size and KB range, and your photo stays on your device. Open the result at 100% zoom before you upload it.
Ready to try it? Open the photo & signature resizer. Resize to exact pixels and KB in your browser.